How to flash devices with RockChip Batch Tool




RockChip Batch Tool is used to flash or upgrade devices with RK SoC like PiPo Tablet PC, Android TV Sticks etc


The following procedure below will show you how to flash or upgrade these devices to factory mode.



Download and install RockChip USB drivers from here


Download and extract the latest version of RockChip batch tool from here



Run RKBatch Tool from inside the extracted folder


Click the Browse button on FW Path


Navigate to the folder containing the firmware of the device you want to flash or upgrade


RockChip batch tool
will now load the firmware selected. When you see loading firmware
finished, it implies the firmware loading process is complete.



Turn off the device then press and Hold volume up button  and connect it to PC.


Keep holding the
volume up button until Rockchip batcch tool detect the device ie under
connected devices, you will see a Green icon showing its connected.



Once connected, Click on Restore button for flash process to start.


The flashing process can take about 10 minutes to complete depeding on the size of the firmware


Once you see Upgrade Done Success, then the flash process is complete.


Device will reboot.




Tags: ,

1 Comment

Leave A Reply

Your email address will not be published.