Download Infinix Note 2 X600 LTE Clone Firmware Flash File [Pac File]


Below is the Firmware Stock ROM [Pac File]  for Infinix Note 2 X600 LTE Clone Firmware

  • Download and Install Spreadtrum USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.
  • Download Stock Rom (Pac) for your Android Device.
  • Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files:
  • Now, open UpgradeDownload.exe.
  • Once Spreadtrum Upgrade Tool is launched, connect your Android device to the computer (make sure your device is switch off).
  • Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the .Pac file (Stock ROM which comes as .Pac).
  • Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.
  • During the flashing process your device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.
  • Now you have successfully flashed your Android Device using Spreadtrum Upgrade Tool. Once your Android Device is successfully restarted, Go to Settings > About Phone > Check firmware.
Infinix Note 2 X600 LTE Clone Firmware Flash File [Pac File] 
Infinix_Note_2_LTE_X600_Android_5.1_Pac_File
S02_Q04_S02_Q04_DA213_5.1_ANDROID_5.1_V09_Infinix_NOTE_2_LTE
Download Now


Infinix Note 2 X600 LTE Clone Firmware

Infinix_Note_2_LTE_X600_Android_5.1_Pac_File
X600-H533-B1-L-20151125
Download Now
Download Infinix Note 2 X600 LTE Clone Firmware Flash File [Pac File] Download Infinix Note 2 X600 LTE Clone Firmware Flash File [Pac File] Reviewed by Cyber Justice on 11:16:00 PM Rating: 5

3 comments:

  1. please i need the second file but link not working please help

    ReplyDelete
  2. working link to second file please? first file camera not working

    ReplyDelete