SOLO Aspire 3 Firmware
Below is the direct link to download the Solo Aspire 3 Firmware stock
ROM (flash file) this Firmware contains Flash Tool, Driver and
Take a Backup of your personal data before flashing or installing the firmware on your smartphone.
As this helps you to recover the personal data whenever any thing wrong happen.
SOLO Aspire 3 Firmware Specifications. File To Flash [ stock ROM]
GSM: GSM 850 / 900 / 1800 / 1900
3G: HSDPA 850 / 2100
SIM Type: Micro SIM
Dimensions: 144.3 x 73.1 x 9.8 mm
Display: 5.0 inches, 540 x 960 pixels, IPS display
Sensors: Accelerometer, Proximity
Colours: Warm Silver. Soft Gold.
Processor Type: Quad-core 1.2 GHz Cortex-A53
Processor Name: Qualcomm MSM8916 Snapdragon 410
RAM: 1 GB
Internal Storage: 8 GB
External Storage: MicroSD card up to 32 GB
Rear: 8 megapixel autofocus camera with LED flash
Video recording: Yes
Front-facing: 5 megapixel camera
Music Support: mp3, aac, aac+, eaac+, amr
Video Support: mpeg4, h.263, h.264
SOLO Music/SOLO View: Unlimited access to 20,000+ songs and movies
WiFi: Wi-Fi 802.11 b/g/n, Wi-Fi Direct, hotspot
Battery: 2000 mAh
HOW TO FLASH SOLO ASPIRE 3?
Download and extract the stock firmware on your computer.
After extracting you will find the SP Flash Tool, Driver and instruction manual.
Install the USB Drivers (skip if drivers are already installed).
Open the SP Flash Tool and load the Scatter File from the firmware folder.
Connect your Smartphone to the computer using the USB Driver.
Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Green Ring will appear at the end of successful Flash.
See Detailed instruction with images On how to Use sp Flash Tool