Install Windows OS on Dual OS Tabs (Android/Windows) with intel chips

Most Tabs nowadays running on intel processor run
two OS ie Android and Windows. It’s really nice having two-operating system running
on a single device. You can just switch from one to the other. Major problem occurs
when one of this OS crash and you have to reload it. 

I already did a tutorial on how to flash Android OS
on these types on devices if you didn’t see it, go here. This tutorial here
will show you how to install Windows OS on this device. It is usually done
after installing Android OS so I recommend you to read the previous tutorial
above except your Android partition is still working perfectly or you just want
only Windows.
The normal process to follow: Flash BIOS >>
install Android >> install Windows

There is really no need to flash BIOS if the problem
with the device is just crash of the operating system.
If you flash a wrong BIOS file, the device will
Do this at your own risk!!!!!
USB Flash Drive (minimum of 8GB)
OTG cable
USB Hub with at least 3 ports
USB keyboard (if device does not have one)
Battery power should be at least 40%

You can skip Flashing BIOS and Installing Android
step if you just want to install Windows OS direct.

Format USB Drive (FAT)
Rename USB drive to WINPE
Extract firmware downloaded
Copy files in BIOS folder to root of formatted USB
Connect USB hub to device
Connect USB Drive and keyboard to hub
Turn on device while pressing ESC key continuously (Some
devices use F7, delete)
Navigate to Boot manager
Select USB drive from the list and wait for flash process
to begin
When it’s done, device will reboot automatically.
If you flash the BIOS above, you will need to
install android before you install windows.

Tutorial on how to install Android OS on this type
of device is found here.

Windows OS
Format the USB flash drive (NTFS format)
Rename the USB flash drive to WINPE
Extract the firmware and open Windows image folder
Copy all the files inside to the root of the USB
Flash drive
Connect the USB hub to device
Attach USB Flash drive, and keyboard to the ports of
the USB hub
Now power on device while pressing ESC key continuously
on keyboard (some devices use F7 or Delete key)
The device will enter Boot mode
You can now use direction keys on keyboard and
navigate to boot manager icon then press Enter key
Use direction key and select the boot device from
the list ie UEFI: USB Drive
Press Enter key to start installation.
Now wait till the installation process is complete
usually takes about 10 – 30 mins

The device will boot after the process is complete.

Tags: ,,

Leave A Reply

Your email address will not be published.