DOWNLOAD M-HORSE BUTTERFLY 3 STOCK ROM/FIRMWARE





M-Horse Butterfly 3 Quick Review

This
phone comes with a 5-inch touchscreen display with a resolution of 540 X
960 pixels with ~196ppi. A size of 137 x 71.1 x 10.8 mm and weighs
about 210g.


Powered
by 1.0GHz dual-core Spreadtrum SC8810 Processor and 512MB of RAM
there’s also 4GB ROM which can be expanded up to 32GB with microSD. 
There is a 5-megapixel primary camera with LED Flash and a 2-megapixel front selfie camera.
This
is a dual SIM Phone with other connectivity options like Wi-Fi, GPS,
Bluetooth, Micro USB 2.0 also supports only 2G and 3G. Sensors on this
phone include Compass Magnetometer, , Accelerometer, Proximity sensor
and Gyroscope.
 
Powered by a 2000Mah removable battery

DOWNLOAD M-HORSE BUTTERFLY 3 STOCK ROM

F8_JHM_butterfly_3_5991G_APK_NG_NEW_V00_20170417
DOWNLOAD ROM

F8_JHM_butterfly_3_5991G_APK_NG_V07_20161123
DOWNLOAD ROM


==============================================

F8_JHM_butterfly_3_5990_APK_NG_NEW_MD_V03_20170426
DOWNLOAD ROM

==============================================

JHM_butterfly_3_APK_256_91_NG_V04_20160811_DOUBLECARD
DOWNLOAD ROM


How to flash/upgrade this device 
Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because 
flashing a wrong firmware, can render the device useless
(can’t power on, can’t charge and will not be detected by a computer)






Download an install SPD drivers from here



Download the latest version of Research Download or UpgradeDownload from here



Extract and Launch Research Download/UpgradeDownload Tool



Click on load icon



Navigate to the folder containing the firmware



Select the pac file in the firmware folder



Wait for it to load in Research Download/UpgradeDownload tool



Click Play/Start button



Now connect the device to PC while holding volume down key



(Some new devices requires holding volume up key)



Wait for flashing process to complete



When you see Passed! Then note that the flashing or upgrading process is complete



Disconnect and boot up device






For a more detail tutorial with video and pictures click here







You can also use tools like Miracle Box, infinity CMII, Volcano, GPG Dragon etc to flash or upgrade SPD devices




Tags: ,,

Leave A Reply

Your email address will not be published.