These are the instructions to Remove TECNO W1 NRD90M 7.0 google account (Frp) using sp flash tool on Windows Computer.
Requirements: Your TECNO W1 NRD90M 7.0 should have atleast 30-40 percent of battery.
Remove TECNO W1 NRD90M 7.0 google account (Frp) using sp flash tool
Step 1: Download and Install MediaTek USB VCOM Drivers on your computer. If MediaTek USB VCOM Drivers already installed on your computer then Skip this Step.
Step 2: Download and extract the Frp Reset files on your computer. After extracting you will be able to see the following files:
Step 3: Now, Switch off your Smartphone.
Step 4: Now, Download and extract sp flash tool on your computer.
Step 5: Now open Flash tool
Step 6: Click on Scatter Loading
Step 7: Select the Frp Reset file (you have downloaded this file in step#2).
Step 8: Now, click on the Download button
Step 9: Connect your phone with USB cable to complete the TECNO W1 NRD90M 7.0 google account (Frp) removal process. Once completed, you will be able to see a Green Box with Download ok .
Step 10: Once you see, the Download ok message in Flash tool, you can disconnect your Device from the computer then Power On your device.
usually takes 5-10 minuets so be patient…