Lenovo Vibe K5 Quick Review

phone comes with a 5.0-inch touchscreen display with a resolution of
1080 pixels by 1920 pixels FHD ~441 ppi . A size of 142 x 71 x 8 mm and
weighs about 142g.

by 1.4GHz octa-core Qualcomm MSM8939v2 processor, 2GB of RAM and
Andreno 450GPU there’s also 16GB of internal storage which can be
expanded up to 32GB with microSD. 

Lenovo S1 Pro runs on Android 5.1 Lollipop.

There is a 13-megapixel primary camera and a 5-megapixel front selfie camera.

is a dual SIM Phone with other connectivity options like Wi-Fi, GPS,
Bluetooth and USB OTG. Supports 2G, 3G and 4G LTE networks. Sensors on
this phone include Compass Magnetometer, Ambient light sensor,
Accelerometer, Proximity sensor and Gyroscope.

This device is powered by a 2750Mah removable battery


How to flash this devices using Qualcomm Flash Image Loader (QFIL)

Download an install the latest version of QPST from here
Download an install Qaulcomm usb drivers from here
To launch QFIL, navigate to 
C:Program FilesQualcommQPSTbin)
Now connect your device to PC while holding both vol up & down button
Device will be detected and you will see 
Qualcomm HS-USB QDLoader 9008 (COM XX)
Click Browse button under Select Build section
Navigate and select the folder of the firmware
Click on XML button
from the pop up, select rawprogram xml  file and then patch xml file
Click Browse button under Select programmer section

From dialogue box select the prog_emmc_firehose mbn file and click OK
Click Download button and wait for flash process to complete

For a more detail tutorial on how to flash this device with QFIL, click here

You can also use tool like QcomDLoader to flash this phone.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

%d bloggers like this: